Antimony Free Cold Fill PET Bottle Resin
APPLICATIONS
Packaging bottles for drinking water, soy sauce, edible oil, alcoholic beverages, etc.
FEATURES
-
Use titanium catalyst without antimony and cobalt heavy metals
-
A copolymeric resin such bottles have high brightness and clarity compared with antimony-based bottles.
-
The reduced crystallization rate of the resins allows for lower processing temperature in the extruder, which could inhibit the generation of acetaldehyde
-
Higher transparency than an antimony PET bottle
MODELS
Resin production facilities are in compliance with ISO 9002, ISO 14001, OHSAS 18001, and U.S. FDA management regulations
7742 Specifications
Item | Unit | Value | Testing Method |
|---|---|---|---|
Intrinsic Viscosity | dl/g | 0.756 ± 0.02 | ASTM D4603 |
Melting Temperature | °C | 248 ± 5 | ASTM D3418
|
Ash Content | % | ≦0.02 | Nan Ya Method |
Moisture | % | ≦0.30 | Nan Ya Method |
Acetaldehyde | ppm | ≦1.00 | Gas Chromatography |
Acid Value | 10⁻⁶equ/g | 20 ± 10 | Titration Method |
Bulk Density | g/cm³ | 0.90 ± 0.05 | JIS K-5101 |
Chip Size | chips/2g | 128 ± 3 | Weight Scale |
Fines | ppm | ＜100 | Nan Ya Method |
Hunter L Value | - | 88.2 ± 2.0 | ASTM E1164 |
Hunter b Value | - | -0.7 ± 1.0 | ASTM E1164 |
Suggestions | Drying Temperature: 160~170°C, Drying Residence: 5~7 hr, Drying Dew Point: -40°C, Drying Air Flow: 1ft³/min/lb-PET, Mold Temperature 275~290°C |
Expiration Date | Consume PET resin within 1 year from pack date |
Storage Conditions | Store PET bag in a dry and clean warehouse |
The technical data sheet is for reference only, the actual data depends on the delivery quality inspection report (COA)
Updated on March 31, 2014
7802 Specifications
Item | Unit | Value | Testing Method |
|---|---|---|---|
Intrinsic Viscosity | dl/g | 0.790 ± 0.02 | ASTM D4603 |
Melting Temperature | °C | 248 ± 5 | ASTM D3418
|
Ash Content | % | ≦0.02 | Nan Ya Method |
Moisture | % | ≦0.30 | Nan Ya Method |
Acetaldehyde | ppm | ≦1.00 | Gas Chromatography |
Acid Value | 10⁻⁶equ/g | 20 ± 10 | Titration Method |
Bulk Density | g/cm³ | 0.90 ± 0.05 | JIS K-5101 |
Chip Size | chips/2g | 128 ± 3 | Weight Scale |
Fines | ppm | ＜100 | Nan Ya Method |
Hunter L Value | - | 88.2 ± 2.0 | ASTM E1164 |
Hunter b Value | - | -0.7 ± 1.0 | ASTM E1164 |
Suggestions | Drying Temperature: 160~170°C, Drying Residence: 5~7 hr, Drying Dew Point: -40°C, Drying Air Flow: 1ft³/min/lb-PET, Mold Temperature 275~290°C |
Expiration Date | Consume PET resin within 1 year from pack date |
Storage Conditions | Store PET bag in a dry and clean warehouse |
The technical data sheet is for reference only, the actual data depends on the delivery quality inspection report (COA)
Updated on March 31, 2014